designed by
Press Steel Baths
Shower Cubicles
Sanitary Ware
Bathroom Furniture

These also come in a wide range of sizes and styles but they should be of at least 2.7mm. thick steel and have bolt-on metal cradles (not stick on plastic). Remember that, because of the slippery nature of a glazed surface, an anti-slip pattern will be required if the bath is to be used for showering in, or by the elderly, infirm or children. This should be a factory applied pumice fused into the enamel, not just the top glaze etched away by a stockist, which will not be as effective an anti-slip finish. All anti-slip patterns are difficult to clean. Tap and hand grip holes should also be drilled at the factory before the bath is enamelled not cut out and painted with a sealer, which often invalidates the guarantee on the bath.

Remember that the following pictures only represent a small part of our range. Click on image for larger picture. Use the BACK button on your browser to return to this page

bettecombo.jpg (37968 bytes) bettelinea.jpg (24074 bytes) betteoval.jpg (20588 bytes) bettermantica.jpg (18258 bytes) betteroma.jpg (45051 bytes) bettestern.jpg (18269 bytes) symettrie.jpg (56689 bytes) Untitled-6 copy.jpg (54578 bytes)

Back Up Next
5 High Street, Iver, Bucks SLO 9ND
Tel. 01753 655255